he guys at OG and BendPak have been bugging me about getting an affordable lift offering in the store, and now they’re available. The HD-9 is great for those looking to add some extra car storage in their garage. With a 4 post you don’t need to worry about concrete depth thanks to its 10″x12″ base plates and available caster kit to make it movable. This supports more weight than the HD-7 but features the same low deck runways so you can easily get your lowered car on the lift.
Features & Specifications
- Features
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8″ aircraft cable
- Rugged 1.25″ roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
- Specs
-
Lifting Capacity*9,000 lbs. (4,082 kg)
- *Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
-
*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
-
A – Min. Runway Height: 4.5″ (114 mm)
-
Max. Rise: 70″ (1,778 mm)
-
C – Max. Lifting Height: 74.5″ (1,892 mm)
-
Time to Full Rise: 45 seconds
-
D – Overall Width: 110.25″ (2,800 mm)
-
E – Outside Length: 174″ (4,420 mm)
-
F – Overall Length: 200″ (5,080 mm)
-
G – Height of Columns: 88″ (2,235 mm)
-
H – Width Between Columns: 100.25″ (2,546 mm)
-
I – Drive-Thru Clearance: 86.5″ (2,197 mm)
-
J – Runway Width: 19″ (483 mm)
-
K – Length of Runways: 164″ (4,166 mm)
-
L – Width Between Runways: 37.5″ (953 mm) or 44.375″ (1,127 mm)
-
M – Runway Centerline: 56.5″ (1,435 mm) or 63.375″ (1,610 mm)
-
N – Outside Edge of Runways: 75.5″ (1,918 mm) or 82.375″ (2,092 mm)
-
Rated Capacity: 115″ (2,921 mm)
-
75% Capacity: 100″ (2,540 mm)
-
50% Capacity: 85″ (2,159 mm)
-
25% Capacity: 70″ (1,778 mm)
-
Locking Positions: 12
-
Lock Spacing: Every 4″ (102 mm)
-
Motor: 220 VAC / 60 Hz / 1 Ph
-
Noise: 45 dB
-
Shipping Weight: 1,746-lbs. (792 kg)
-
Dimensions: 165” x 22” x 34” (4,191 mm x 559 mm x 864 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
FAQ & Support
Installation and Operation Manual
Concrete Slab Requirements
User Manual
HD-9 Specs
BendPak Warranty
Balance Safety Guide